Universal Testing Machine | Servo-Pneumatic Universal Testing Machine


Description: This machine is a development of the NAT which was developed by Keith Cooper and Professor Steven Brown at the University of Nottingham. The use of a high precision servo-pneumatic valve in conjunction with a low-friction actuator and sophisticated data acquisition and control, results in a performance that is equal to many servo-hydraulic systems.

Accurate, digitally generated waveforms are applied by the actuator producing repeatable stress variations in test specimens that are simulative of those in a road pavement due to moving traffic. The actuator is double-acting allowing both compressive and tensile forces to be applied. A triaxial cell system is available for the measurement of the resilient modulus of unbound materials.



Feature:

Key Features

  • Low cost dynamic loading universal test system ideally suited to testing asphalt and unbound granular materials
  • Double acting low friction actuator with integral stroke transducer
  • Utilises high performance ceramic spool servo-valve
  • High quality stainless steel frame
  • Issued with UKAS accredited certificate of calibration for EN 12697-24; EN12697-25, EN 12697-26
  • Accessories available to perform a range of standard and non standard test methods
  • Can be supplied with standard software to perform EN, ASTM andAASHTO test methods and universal software with which to design non standard test routines

Key Uses

  • Assessment of resistance to permanent deformation (rutting)
  • Measurement of stiffness modulus
  • Assessment of resistance to fatigue cracking
  • Resilient modulus of unbound materials
  • Mix design

Spesification

Maximum LoadElectronically limited to 15.5kN
Load Transducer±20kN
Actuator Stroke mm30
Frequency Hz0 to 30
Electrical Supply¹220-240 Volts 50 Hz @ 13A
Compressed Air7-10 bar at 600 L/min
Dimension mm (WxDxH)Frame 360 x 400 x 740
Control Box 360 x 280 x 140
Working space required mm(WxDxH)825 x 1650 x 2100 when fitted in cabinet CRT-TCC
Estimated Weight KgFrame 30
Control box 6
PCIncluded


PT Taharica.
Jl. Radin Inten II No. 62 Duren
Sawit - Jakarta 13440
Previous
Next Post »