Description.
The compressive index of a material the failure load per width/basis weight) increase with sheet density in much the same way as the tensile index. Hence fibre characteristics that contribute to density and flexural modulus of the sheet and the resilience of the fibres themselves are likely contributing factors.
Fully microprocessor controlled menu driven software allows easy selection and setting of test parameters with precise pneumatic clamping hold the specimen accurately and sample test to minimize the human error during test to provide rapid and efficient determination of compression strength of fluting media or test linersuitable for paper and paperboard GSM range 100-400 with in-built printer.
Spesification
Measuring results
: Peak load for compression strength of individual values
: Mean & max. value and coefficient of variation value.
GSM range
: 100 to 400 g/m2
Compression length
: 0.5 mm
Test span
: 0.7 mm
Clamping force
: 2300 ± 500 N at 500 kPa (75 psi) air pressure
Strip dimension
: Length 150 mm
Width 15 mm
Accuracy
: ± 1% of reading within 30-300 N
Computer output
: RS 232C.
Power consumption
: 175 W
Power Supply
Ordering
: 1-phase, Voltage and frequency to be stated when
Air Pressure
: 5 Kg/cm2
Applicable Standard
APPITA/AS 1301, 450 rp, BS 7325, DIN 54 518, ISO 9895
SCAN P46, TAPPI T826
Shipping Data
Ordering Data
Net Weight
Model No.
Gross weight
Voltage
Dimension
Frequency
Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
Measuring results
|
: Peak load for compression strength of individual values
: Mean & max. value and coefficient of variation value. |
GSM range
|
: 100 to 400 g/m2
|
Compression length
|
: 0.5 mm
|
Test span
|
: 0.7 mm
|
Clamping force
|
: 2300 ± 500 N at 500 kPa (75 psi) air pressure
|
Strip dimension
|
: Length 150 mm
Width 15 mm |
Accuracy
|
: ± 1% of reading within 30-300 N
|
Computer output
|
: RS 232C.
|
Power consumption
|
: 175 W
|
Power Supply
Ordering |
: 1-phase, Voltage and frequency to be stated when
|
Air Pressure
|
: 5 Kg/cm2
|
Applicable Standard
APPITA/AS 1301, 450 rp, BS 7325, DIN 54 518, ISO 9895
SCAN P46, TAPPI T826
APPITA/AS 1301, 450 rp, BS 7325, DIN 54 518, ISO 9895
SCAN P46, TAPPI T826
Shipping Data
|
Ordering Data
| |
Net Weight
|
Model No.
| |
Gross weight
|
Voltage
| |
Dimension
|
Frequency
|
Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
ConversionConversion EmoticonEmoticon