Description:
This instrument is used for wet grinding and de-fibrating chips or experimental pulp making. Utilized for developing pulping processes and strength development studies on raw steamed or chemically cooked chips, fully cooked pulp, cooked straw, waste paper and many other materials.
With motorized screw feeding arrangements.Disc dia 304 mm, speed 1500-3000 rpm.
Spesification
Refiner Disc Dia
: 12 inches in Six Segments
Speed of Refiner
(Main shaft rotational frequency)
: 1400 rpm.
Consistency range
: 3 to 30%
Parallel degree of both the refiner discs knives are accurate during opening / closing of the cover.
The raw material filling mechanism by manual / motorised and easy to clean.
Gap Adjustment
0-20 mm adjustable between the disc with a step of 0.025 mm
Water dilution
1/2” copper pipe line fitting at 3 equal distance for dilution of the material during refining.
LAB DISC REFINER CODE UEC-2019, WITH GRINDING DISC (FOR HARDWOOD CHIP 06 PCS. IN ONE SET) FITTED IN SIDE COMPLETE WITH BASE, PULLEY AND WATER DILUTION ATTACHMENT
Power supply: 440 V 3 PH 50 HZ 20 H.P.
NOTE : We suggest that the Power required to drive the refiner varies depending upon the nature of the fibres i.e. 7.5 to 40 Kw
EXTRA OPTIONAL:
i. Extra grinding disc
ii. Manual feeding attachment
iii. Motorised feeding attachment.
iv. Main Motor upto 40 Kw are extra cost
Ordering Data
Shipping Data
Net Weight
Model No
Voltage: 440 V, 3 Ph
Gross weight
Frequency: 50 Hz,
Dimension
Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
Refiner Disc Dia
|
: 12 inches in Six Segments
|
Speed of Refiner
(Main shaft rotational frequency) |
: 1400 rpm.
|
Consistency range
|
: 3 to 30%
|
Parallel degree of both the refiner discs knives are accurate during opening / closing of the cover.
The raw material filling mechanism by manual / motorised and easy to clean.
The raw material filling mechanism by manual / motorised and easy to clean.
Gap Adjustment
|
0-20 mm adjustable between the disc with a step of 0.025 mm
|
Water dilution
|
1/2” copper pipe line fitting at 3 equal distance for dilution of the material during refining.
|
LAB DISC REFINER CODE UEC-2019, WITH GRINDING DISC (FOR HARDWOOD CHIP 06 PCS. IN ONE SET) FITTED IN SIDE COMPLETE WITH BASE, PULLEY AND WATER DILUTION ATTACHMENT
|
Power supply: 440 V 3 PH 50 HZ 20 H.P.
NOTE : We suggest that the Power required to drive the refiner varies depending upon the nature of the fibres i.e. 7.5 to 40 Kw
EXTRA OPTIONAL:
i. Extra grinding disc
ii. Manual feeding attachment
iii. Motorised feeding attachment.
iv. Main Motor upto 40 Kw are extra cost
i. Extra grinding disc
ii. Manual feeding attachment
iii. Motorised feeding attachment.
iv. Main Motor upto 40 Kw are extra cost
Ordering Data
|
Shipping Data
|
Net Weight
|
Model No
|
Voltage: 440 V, 3 Ph
|
Gross weight
|
Frequency: 50 Hz,
|
Dimension
|
Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
PT Taharica.
Jl. Radin Inten II No. 62 Duren
Sawit - Jakarta 13440
ConversionConversion EmoticonEmoticon